Apple reveals the battery cycle limit for the MacBook Neo

Apple has updated its support documentation to confirm the maximum battery life cycle for the new MacBook Neo. Here are the details.

First things first: what is as important as a battery cycle?

In short, each battery cycle corresponds to the number of times a Mac laptop uses power equal to 100% of the battery’s capacity, for every one or more charges.

Or, as Apple explains:

For example, you can use half of your laptop’s charge in one day, then fully charge it. If you do the same thing the next day, it will count as one charge cycle, not two. In this example, it may take several days to complete the cycle.

In other words, if you use 50% of the battery today, recharge it, then use 30% tomorrow and charge again, and finally use 20% the next day, that will correspond to a full battery cycle, even though the Mac has been recharged three times, and the battery level has not dropped below 50%.

So what about the MacBook Neo?

According to Apple, the new MacBook Neo has a 36.5 ‑watt‑hour lithium-ion battery, which Apple says is enough to keep it running for 16 hours of video streaming and up to 11 hours of wireless web browsing.

Today, Apple updated the Determine battery cycle count for Mac laptops support page to include the maximum charge for the MacBook Neo.

Based on the document, the MacBook Neo has a higher cycle count 1,000meaning that after 1,000 battery cycles, it will be “considered used,” after which it will need to be replaced.

Importantly, that does not mean that the battery will stop charging as soon as it reaches the 1,000 cycle limit, but rather that its ability to hold a charge and deliver power will be worse than before.

How much is that in material terms?

That will vary greatly depending on how you use your Mac. In practical terms, however, if you go through one full battery cycle per day, every single day, it will still take about 2.7 years to reach the 1,000 cycle mark.

With simple use, 0.3 cycles per day, that timeline can be extended to nine years.

Finally, 1,000 battery cycles is at the end of what Apple currently offers, leaving the MacBook Neo next to most of the MacBook, MacBook Pro, and MacBook Air models that Apple has sold since 2009.

Where can I check the battery cycle count on my Mac?

Here are Apple’s official instructions for checking your Mac’s battery cycle rate:

1. Hold down the Option key and click the Apple  menu, then choose System Information.
2. Under the Hardware section of the System Information window, select Power. The current cycle count is listed under the battery information section.

To learn more about battery cycle calculations for Mac laptops, follow this link. And be sure to check out 9to5Mac’s MacBook Neo review.

It’s worth checking out on Amazon